Woodworking equipment

Tape delitelny machine Tape delitelny the machine is intended for division of a dry board on thickness for the purpose of receiving qualitative cut timber, a tare plate up to 300 mm wide. Also the machine is used for production of preparations before processing on quadrilateral machines. The...

The machine the gorbylno - overworking GP - 500 - 3 with 3 clamping rollers, sliding forward saws, the 4th saw The machine the gorbylno - overworking GP - 500 - 3 is intended for processing gorbylya in a cut board, works in the automatic mode without involvement of additional personnel. The machine...

The multipurpose machine at first does a gun carriage from 80 to 160 mm in size of a log, then the gun carriage moves on inclined guides to the giving table of the multisaw unit and is sawn on cut boards of given sizes. Process of sawing of a log on boards takes two minutes (in a stream one minute...

The machine for processing of a tonkomer (balance) of SPB - 8M (modernized).  The basic difference from the SPB - 8 - 2 machine is that on it it is possible to regulate gun carriage thickness at the expense of screw couple without stopping process of sawing up from 60 to 150 mm. It is intended...

The Tortsovochny machine for the rounded log It is intended for face cutting of the rounded logs. Sort of current of a power line variable Frequency of current, Hz 50 The used tension, In 380 Frequency of rotation, rpm 3000 Power, kW 11 Frequency of rotation of a saw,...

The machine for processing of balance of SPB - 8 - 2 The machine for processing of balance of SPB - 8 - 2, is intended for sawing up of thin wood, with a diameter up to 220 mm on cut boards. The machine can be used as separately to processing of low - grade wood, balance, and as the machine of the...

The log tilter for brusuyushchy machines The HELICON - A company is founded in 2001 and is the production trade enterprise specializing in release of woodworking machines and the equipment. The range contains more than 50 types of machines for processing of wood and constantly is replenished with...

Machine tortsovochny TNP - 500 Principle of action: Preparation moves in the machine sideways and nestles on an emphasis. To remove obzolny part of preparation, it is necessary to give on itself saw knot then there is a preparation saw cut in the size. The saw knot settles down on 16 adjustable...

Machine tortsovochny pendular TTsM - 630 Principle of action: Preparation moves in the machine sideways and nestles on an emphasis. To remove obzolny part of preparation, it is necessary to lower for the handle the lever mechanism with a saw then there is a preparation saw cut in the size. The...

Machine tortsovochny STP - 2P - 500 type through passage It is intended for cross sawing up (tortsovka) of a cut board in a given size. SCOPE: It is applied in sawing productions of various power. DISTINCTIVE FEATURES: - Steel welded structure; - The special thermoprocessed saw shaft. Sort of...

Machine tortsovochny pendular TTsM - 500 Models d - 500mm d - 630mm Saws are not included in the package of the machine Principle of action: Preparation moves in the machine sideways and nestles on an emphasis. To remove obzolny part of preparation, it is necessary to lower for the handle the lever...

Machine tortsovochny TTs - 450 Principle of action: Preparation moves in the machine with a side and nestles on an emphasis. To remove obzolny part of preparation, it is necessary to give on itself saw knot then there is a preparation saw cut in the size. The saw knot settles down on 16 adjustable...

The machine the brusuyushchy gorbylno - overworking SBGP - 700 Saws are not included in the package of the machine Models With the frequency converter Without frequency converter The machine the brusuyushchy gorbylno - overworking SBGP - 700 allows to process low - grade wood: Tonkomer (balance)...

The machine the gorbylno - overworking GP - 500VRP, three - saw, with 2 driving rollers, all sliding saws The GP - 500 - VRP machine can be used also as the side - cutting machine (width of cutting of edges is regulated in the range from 80 to 250 mm). The multipurpose gorbylno - overworking GP -...